Export compliance guide
A self service kiosk certification package is not a logo printed on a chassis. It is a legal technical dossier that customs officers and tender evaluators will ask for by name. This guide breaks down what CE, FCC and RoHS actually cover, how requirements differ across export markets, and how to verify a supplier's paperwork before you commit to a bulk order.
Exporting to the EU: you need CE (LVD, EMC, and RED if the unit is wireless) plus RoHS, backed by a Declaration of Conformity.
Exporting to the United States: you need FCC compliance, either SDoC or a full FCC-ID depending on whether the kiosk carries a wireless module.
Skip either step and the risk isn't a fine on paper — it's a held shipment, a disqualified tender, or a liability claim after the unit is already installed.
Procurement teams often treat certification as paperwork to collect after the hardware decision is made. In practice, it belongs in the decision itself, because the downside shows up at three different points in a project, each with its own kind of damage.
A kiosk shipped without valid, model-matched documentation is routinely held at the port of entry. Demurrage fees, re-labeling costs, and schedule slippage escalate quickly, and the cost is rarely predictable in advance — which is exactly the risk certification exists to remove.
In most public-sector and enterprise tenders across the EU and North America, CE and FCC documentation is a mandatory prequalification item, not a bonus point. A public transit or municipal kiosk project in Germany, for instance, will typically exclude a bid outright if the DoC is missing, regardless of hardware quality.
A non-compliant kiosk that interferes with nearby equipment or develops an electrical fault becomes the integrator's problem once it's live on-site, not the factory's. The liability sits with whoever signed off on the installation.
Certification is not a sticker on the chassis. It is a complete package of test reports and a Declaration of Conformity. If a supplier cannot produce both on request, treat that as a reason to pause the order.
These three names get used almost interchangeably in kiosk spec sheets, but they are three separate regulatory systems, each tied to a different market and a different failure mode if it's missing.
A single test report is not enough. European customs authorities and tender evaluators require the report and the Declaration of Conformity together, and neither one transfers across a different kiosk model, screen size, or hardware revision.
A CE test report cannot substitute for either path. CE and FCC are independent systems built on different test standards, and US customs will not accept European paperwork in place of it.
RoHS restricts six hazardous substances, including lead, mercury, and cadmium, down to the individual component level. It is mandatory across the EU as part of the CE framework, and while the United States has no federal RoHS requirement, large enterprise buyers routinely write it into their own procurement contracts regardless. Unlike LVD or EMC, RoHS is not a one-time performance test — it is a material declaration that has to be traceable through every line of the bill of materials.
These aren't universally mandatory, but larger overseas tenders ask for them often enough that it's worth knowing what each one covers, particularly when evaluating touch screen kiosk selection criteria for a specific deployment.
A quick reference for a certified commercial kiosk being sourced for a specific destination market.
| Target market | Mandatory certification | Notes |
|---|---|---|
| European Union / EEA | CE (LVD + EMC + RED) + RoHS | Test report and Declaration of Conformity required together |
| United States | FCC (SDoC or FCC-ID) | Wireless modules need an independent FCC-ID; RoHS is contractually required by most enterprise buyers |
| United Kingdom | CE accepted; UKCA optional | Recognized indefinitely as of 2026 for most electronics, but policy has changed repeatedly since Brexit — confirm current status with your customs broker before shipment |
| Canada | ISED (EMC) + CSA/cUL (safety) | Test methods resemble FCC's, but Canada requires a separate, independent certification |
| Australia / New Zealand | RCM | Covers both electrical safety and EMC in a single mark |
A practical sequence for an integrator or procurement team before signing off on an export standard kiosk supplier.
Qtenboard operates a 330,000 square meter manufacturing facility as an OEM/ODM kiosk manufacturer, shipping to more than 100 countries. Our standard hardware platforms, including the queue management kiosk series, are built around this certification scope:
For B2B partners, we provide a complete document package, test reports plus the Declaration of Conformity, ready to attach directly to a tender submission or customs filing. Our CKD/SKD export solutions preserve certification validity for knockdown-kit shipments when assembled to our build guidance, and our compliance team can review a target market's requirements before you place a sample order — useful groundwork if you're also working through a hotel check-in kiosk procurement checklist for a hospitality project.
| Misconception | What's actually true |
|---|---|
| A CE sticker on the chassis means the unit is compliant | Without the test reports and Declaration of Conformity behind it, the sticker proves nothing |
| Passing CE means it will automatically pass FCC | They're separate regulatory systems with different test standards; one has no bearing on the other |
| A consumer-grade display's certificate can cover a commercial kiosk | Commercial kiosks run 24/7 under different duty cycles; consumer certificates don't carry over |
| RoHS is one certificate the whole product either has or doesn't | It's a material declaration traceable through every component in the bill of materials |
| A supplier's ISO 9001 certificate means the product is certified | ISO 9001 qualifies the factory's process, not the compliance of any specific kiosk model |
As of 2026, the UK recognizes CE marking indefinitely for most electronic products, so CE-certified kiosks are generally accepted in Great Britain, with UKCA remaining optional. This policy has changed several times since Brexit, so confirm the current status with your customs broker before shipment.
No. Only kiosks with a built-in Wi-Fi, Bluetooth, or other radio module require FCC-ID certification. A kiosk without a wireless module can be compliant under SDoC instead.
No. CE, FCC, and ISED are independent regulatory systems built on different test standards. Documentation issued for one market cannot substitute for another.
Not at the federal level. There is no US-wide RoHS mandate, but most large enterprise buyers and system integrators write RoHS compliance into their own procurement contracts regardless, so it's treated as a de facto requirement for serious B2B deals.
Yes. Qtenboard supplies complete test reports and Declaration of Conformity files suitable for tender submission and customs clearance.
Qtenboard maintains certification validity for CKD and SKD semi-knock-down shipments when final assembly follows our certified build guidance.
CE, FCC, and RoHS are the baseline for any kiosk crossing a border, and the review belongs at the sampling stage, not as a scramble before shipment. Match the certification set to your actual deployment country, whether that's a single EU tender or a multi-market rollout across the US, UK, Canada, and Australia, and treat a full certification document package as a contractual deliverable rather than an assumption. If you're also comparing hardware architecture at this stage, our guide to modular kiosk architecture covers the design side of the same decision.
CEO | Interactive Display & Collaboration Solution Expert
I am the founder of Qtenboard, bringing over 17 years of hands-on expertise to the touch display industry. Drawing on the global management perspective gained through my EMBA studies at ShenZhen University, I lead my team in optimizing every stage of our operations—from product definition to high-efficiency supply chain management—ensuring our manufacturing capabilities remain at the forefront of the industry.
As the leader of Qtenboard, I specialize in providing tailored OEM/ODM solutions for interactive whiteboards, LCD video walls, digital signage, and industrial-grade touch terminals. Backed by our 330,000 m² modern industrial park in Shenzhen, we maintain full-lifecycle control over industrial design, precision manufacturing, and rigorous performance testing.
With nearly two decades of project experience, Qtenboard’s display solutions are now deployed in over 120 countries and regions, earned the trust of more than 15,000 enterprise customers worldwide. If you are seeking a responsive partner with a deep manufacturing foundation for your customized touch display projects, my team and I are ready to support your vision with professional excellence.
ukr
EN 
pt 
spa 
th 
vie 
aze 
bel 
est 
lav 
ru