Qtenboard Launches Industrial Touch Panel PC Series — Rugged, Fanless, OEM/ODM-Ready HMI Solutions for Factory Automation & Embedded Applications

From Standard Capacitive Touch to Heavy-Duty Edge AI: One Industrial Touch Panel Manufacturer for Your Whole Project

Front IP65 protection, 8.4″–55″ size range, Intel / ARM / AMD platform options, and full customization support for system integrators, machine builders, and industrial OEMs.

1. Why We Launched: Industrial HMI Is Not Commercial IT

Choosing a PC industrial touch platform is not the same as choosing office hardware. A factory floor means dust, water splash, oil mist, vibration, wide temperature swings and 7×24 operation — conditions that quietly kill consumer monitors and commercial all-in-one computers within months. At the same time, the demands of industrial touch environments keep rising: operators wearing gloves, sunlight-readable screens, sanitary cleaning in food plants, and real-time data from legacy PLCs and sensors.

For system integrators and machine builders, the practical problem is that standard industrial panel PCs rarely match a project’s exact specification — the size is off by a few millimetres, one serial port is missing, the touch technology does not suit the operation, or the enclosure does not fit the brand. Full customization, meanwhile, is often feared as slow and risky. And more and more buyers are asking a different question entirely: is this supplier a real industrial smart display factory with OEM/ODM capability, or just a reseller?

This is why Qtenboard, a China-based source manufacturer with over 20 years in display and industrial hardware, is formally launching its industrial touch panel PC product line under New Product Launches. What makes a touchscreen industrial-grade is not one feature but the whole chain — sealed front bezel, wide-temperature components, shock-rated assembly, industrial touch controllers, and a factory that can turn a drawing into a tested, branded product. That is the chain we are announcing today.

2. The Product Line at a Glance: Four Series, One Factory

The new series covers every common industrial HMI requirement, from cost-sensitive workshop terminals to heavy edge-AI computing:

• Capacitive Touch Panel PC — standard sizes 10.1″ to 24″, projected capacitive multi-touch, for workshop HMI, monitoring and control terminals;
• Rugged Industrial Panel PC — front panel IP65 / IP66 / IP67, –10°C to +60°C, MIL-STD-810G shock and vibration, for heavy industry and outdoor terminals;
• Fanless Industrial Panel PC — passive cooling, zero moving parts, for cleanrooms, food & beverage and pharmaceutical automation;
• OEM/ODM Custom Series — full-dimensional customization from screen and interfaces to housing, logo and firmware.

Whether you need an industrial panel PC touch screen as a standard product or a fully bespoke touch panel industrial HMI, one supplier covers the whole range — with one BOM, one support window, and one factory behind every unit.

3. Product Line One: Capacitive Touch Panel PC — The Flexible Workhorse

The capacitive series is an industrial touch screen PC that behaves like a premium tablet but is built for a machine. Projected capacitive (PCAP) multi-touch delivers the smooth gesture experience operators expect, while the full-HD IPS panel keeps the screen readable from any angle. For a touchscreen PC industrial deployment where cost and delivery time matter, this is the series to start from — an industrial PC touchscreen with standard pricing and short lead times.

Parameter	Specification
Screen Size	10.1″ / 13.3″ / 15″ / 15.6″ / 17″ / 19″ / 21.5″ / 24″
Touch Type	Projected capacitive multi-touch (PCAP), gesture support
Panel	Full HD IPS, wide viewing angle, high brightness optional
Surface	Anti-glare, anti-fingerprint coating
I/O	LAN, RS232 / RS485, USB, HDMI
Operating System	Windows / Linux / Android (optional)
Mounting	Panel mount, wall mount, VESA, bracket (optional)

All our industrial touch displays in this series use IPS panels with wide viewing angles, so production-line staff can read status screens from across the workcell. The industrial touch screen panel is available with high-brightness options where ambient light is strong. The all-in-one structure integrates display, touch and host in one unit — an all in one industrial PC touch screen that saves cabinet space, simplifies wiring and cuts on-site installation time.

For kiosk and terminal builders, a 10 inch industrial Android panel PC is the most frequently specified configuration: compact, fanless by design, and ready for Android-based applications. The same build is also offered as a panel PC industrial standard configuration with Windows or Linux, depending on your software stack. Typical deployments: workshop HMI terminals, production-line monitoring boards, SCADA visualization and machine parameter setup screens.

4. Product Line Two: Rugged Industrial Panel PC — Built for Harsh Environments

Where the capacitive series stops, the rugged industrial panel PC takes over. Front-panel protection up to IP67, a –10°C to +60°C operating range, and MIL-STD-810G shock and vibration compliance make it the choice for metal cutting, mining, chemical plants, outdoor industrial terminals and vehicle-mounted equipment. The industrial panel PC rugged build starts with a sealed front frame that blocks dust, water and oil mist, and an aluminum alloy or stainless-steel bezel for corrosion resistance and easy cleaning.

From wash-down food plants to mining control rooms, these industrial touchscreens are engineered for environments that punish ordinary hardware. These rugged industrial touchscreen computers are designed around industrial-grade touch controllers: PCAP touch that keeps working with gloves and wet hands, 10-point multi-touch, anti-glare and anti-UV coatings, 87% light transmittance, and 7H chemically strengthened glass that survives tools, scratches and long-term sun exposure. If you need a touchscreen monitor industrial deployment in a wash-down environment, or an industrial touch monitor for a forklift or mobile terminal, this series is the answer — the touchscreen industrial panel PC that keeps running when the environment does not cooperate.

4.1 Heavy-Duty Performance: The QM-GK Edge AI Series

For computing-heavy applications, the QM-GK series is a heavy-duty industrial touch screen computer built around the 12th Gen Intel Core (Alder Lake-S) platform — up to 12 cores and 4.9 GHz burst, Intel H610 chipset, and Intel UHD graphics. It is the industrial pc touch screen monitor to choose when machine vision, edge AI inference or AOI inspection needs real computing power at the machine. An industrial embedded touch screen with this much headroom lets integrators consolidate IoT workloads and AI inferencing on one panel PC.

QM-GK Key Specs	Detail
Processor	12th Gen Intel Core i7 / i5 / i3 / Pentium (Alder Lake-S), Intel H610
Memory & Storage	Up to 64GB DDR4 3200MHz (dual SO-DIMM); M.2 NVMe + 2.5″ SATA
Expansion	PCIe Gen4 x16 slot for GPU / VPU / TPU / AI accelerator modules
Protection	Front panel IP65, true-flat screen, waterproof gasket seal, MTBF 70,000 hrs
Display	450 nits, 10-point anti-glare PCAP with anti-UV coating, 4K HDMI dual display
I/O	5 serial ports (4×RS-232 + 1×RS-232/422/485 with AFC); 6×USB up to 10Gb/s; dual 2.5GbE LAN
Environment	–10°C to 60°C; 5G shock; 3-axis vibration 10–500Hz; Intel PTT security
Power & Mounting	Direct AC input, no external adapter; panel / wall / arm / stand / VESA 100×100

Wireless options include Wi-Fi 6E and Bluetooth 5.2 via the built-in M.2 E-key slot. For applications that stream high-resolution camera feeds and process them at the edge — machine vision, AI AOI, surveillance — the dual 2.5GbE ports and PCIe Gen4 expansion give the industrial touchscreen computer real headroom, not just a touch panel bolted onto a PC.

5. Product Line Three: Fanless Industrial Panel PC — Zero Moving Parts

An industrial touch screen in a cleanroom, a food-processing line or a pharmaceutical plant has to be cleanable, silent and dependable. The fanless series removes every rotating component: passive aluminum heat sinks dissipate heat with no fan noise, no dust intake and no mechanical wear — an industrial PC touch screen designed for years of 7×24 operation. Low-power Intel and ARM processor options let you balance compute and energy cost per machine.

Because there are no fans to clog, the sealed front panel can be kept flush and washable, which is exactly what sanitary environments require. Long product-availability cycles protect your installed base: the same model can be supplied for the life of an industrial project, so maintenance stays consistent and spares stay simple. Typical buyers: cleanroom equipment makers, food & beverage packaging machinery builders, and pharmaceutical line integrators.

6. OEM/ODM Customization: The Part That Makes a Project Fit

Industrial projects almost never match a catalog product exactly — the bezel is a few millimetres too wide for the machine frame, the PLC needs an extra RS-485 port, the operators need glove touch, and the brand needs its logo on the front. Because Qtenboard is the original manufacturer (not a trader), customization is a core capability rather than an extra service. An open frame monitor industrial configuration, for example, lets machine builders integrate the display directly into their equipment without a full enclosure — including industrial open frame monitors 120–1200 nits brightness options for indoor and sunlight-exposed machines.

Customization Dimension	What We Can Change
Display	Screen size, aspect ratio, high-brightness panel
Touch	PCAP or resistive, glove-touch firmware tuning
Interfaces	RS485 / RS232 / CAN / GPIO, custom I/O definitions
Mainboard	Chip platform selection, configuration upgrades, industrial ODM carrier board design
Housing	Appearance, material (aluminum / stainless steel), structure: panel, wall, VESA, bracket
Modules	Wi-Fi, Bluetooth, camera, QR scanner, IC/ID card reader, NFC, fingerprint, GPS, microphone
System & Branding	Firmware customization, OS pre-install, laser-marked logo, custom packaging
Certification	Industry certifications supported on request per project

Custom industrial PC touch panel builds are managed through a controlled process: requirements confirmation (size, interfaces, touch, OS) → evaluation and quotation → drawing and sample approval → pre-production → functional and burn-in testing → pre-shipment inspection → batch delivery. As an industrial open frame monitor manufacturer and a full panel-PC maker, we keep the whole chain — SMT, metal fabrication, testing and export packaging — under our own roof, which is what makes customized lead times predictable.

7. Why Qtenboard: The Factory Behind Your Project

Qtenboard is an industrial touch panel manufacturer and a high quality industrial touchscreen panel pc manufacturer — a China-based source factory that serves B2B customers worldwide as an OEM/ODM partner. When you source from the factory directly, you control the bill of materials, the branding, the certification scope and the unit cost. There is no middleman margin and no third-party quality surprises.

• Founded 2005, with 20+ years in global trade;
• 3 factories in China covering 33,000 m², around 1,000 skilled workers;
• Automated SMT lines, metal fabrication, in-house testing platforms and export packaging — all in-house;
• Exports to 100+ countries as a long-term OEM/ODM partner of international brands;
• Certifications: CE, FCC, RoHS options, IP test reports, and ANATEL (Brazil) certification for approved markets;
• In-house R&D supports hardware and software customization, including industrial ODM carrier board design for custom mainboard integration;
• Full B2B support: drawing approval → sample / pre-production → burn-in testing → pre-shipment inspection → remote commissioning.

As an industrial touchscreen panel PC manufacturer, we build high-quality industrial touchscreen panel PCs, rugged industrial panel PCs, fanless terminals and open-frame displays in one factory. Whether you evaluate us as an industrial touch panel PC manufacturer, an industrial touch screen pc supplier, or an industrial touchscreen pc supplier, the answer is the same: a dedicated source factory in China with test records available for project review.

Buyers who compare industrial touch panel pc factory China options usually end up comparing certificates and samples — both are on request. And for long-term programs, having an industrial touch panel pc China-based manufacturing partner means stable supply, spare-parts planning and one accountable team for the life of the product line.

8. Who This Is For: Customers and Applications

Customer Type	Pain Point	Qtenboard Answer
Factory Automation Integrator	Needs a stable HMI terminal that matches PLC / SCADA systems	Capacitive series + rich I/O + Windows / Linux support
Machine Builder (OEM)	Standard products do not fit the machine frame or interfaces	OEM/ODM: size, interfaces, mounting structure, logo
Heavy Industry / Outdoor	Dust, water splash and vibration cause frequent failures	Rugged series: IP65/IP66/IP67 + MIL-STD-810G + wide temperature
Food / Pharma / Cleanroom	Fan dust, cleaning difficulty, sanitary standards	Fanless series + stainless-steel bezel + sealed front panel
Kiosk / Self-Service Builder	Needs embedded touch with card readers / cameras / scanners	10.1–24″ sizes + module integration + Android / Windows
Brand Owner / Reseller	Needs private label from a reliable source factory	Full ODM: logo, housing, firmware, packaging + factory capacity

Typical deployments: factory production-line HMI panels, CNC and machine-tool control interfaces, smart vending machines, beverage and retail kiosks, smart lockers and parcel cabinets, warehouse and logistics terminals (forklifts, sorting lines), food-packaging machine interfaces, AI AOI stations, and outdoor industrial equipment monitoring.

For kiosk integrators in compact footprints, a 10 inch Android industrial panel PC covers most self-service cases; for larger control rooms and vending walls, sizes scale up to 24″ and beyond (the full range spans 8.4″ to 55″). Our multilingual team supports English, Spanish and other languages — for Latin American projects, just ask for panel táctil industrial (industrial touch panel) specifications and we will respond in Spanish.

9. FAQ: What Industrial Buyers Ask Us

Q1. What sizes and touch types does the industrial touch panel PC range cover?

The full range spans 8.4″ to 55″. Standard capacitive models run from 10.1″ to 24″, and both projected capacitive (multi-touch, glove-capable) and resistive touch are available depending on the application.

Q2. Can the front panel really survive dust, water and wash-down environments?

Yes. Rugged models offer front-panel IP65 / IP66 / IP67 protection with sealed frames, and the QM-GK series adds a heavy-duty waterproof gasket for pressure-water-jet environments such as food-processing plants.

Q3. What operating temperature range is supported?

–10°C to +60°C for the rugged series, covering most factory floors, outdoor terminals and vehicle-mounted use without additional enclosure conditioning.

Q4. Which operating systems and processors can I choose?

Windows, Linux and Android are all supported. Processor options include 12th Gen Intel Core (i3 / i5 / i7), Intel Pentium, AMD, Rockchip, HiSilicon and ARM platforms, so you can balance performance, power and cost per machine.

Q5. Can you customize interfaces, housing, logo and firmware for my brand?

Yes — that is the core OEM/ODM service. Custom I/O definitions (RS485 / RS232 / CAN / GPIO), motherboard and carrier board design, housing materials and structure, laser-marked logos, pre-installed OS and custom firmware are all supported, with drawings and samples confirmed before production.

Q6. Do you support glove operation and harsh cleaning?

Yes. Industrial touch controllers are tuned for gloved and wet-hand operation, and the chemically strengthened 7H glass with anti-glare / anti-UV coating is designed for long-term cleaning and sun exposure.

Q7. What are MOQ, lead time and payment terms?

Sample orders and batch orders are both supported. Lead time depends on configuration, quantity and customization level. Payment terms: T/T, LC or project-specific arrangements.

Q8. What certifications are available?

CE, FCC and RoHS options, IP-rated enclosure test reports, and ANATEL (Brazil) certification for approved markets. Additional industry certifications can be supported on request per project.

Q9. What warranty and after-sales support do you offer?

Standard and extended warranty options, remote technical support, installation and commissioning guidance, firmware and OS updates, replacement-parts supply, and batch / repeat-order support for long-running product lines.

Q10. What do you need from me for a quotation?

Screen size, quantity, touch type, processor and OS preference, memory and storage, required I/O, mounting method, operating environment (temperature, dust, moisture, vibration), certification needs, branding requirements and target delivery date.